d 80-90mm-Cylindrical or taper hole Open--NEY（DuangDong）Bearing Industry Co.,LTD

Index >> Self Aligning Ball Bearing >> Cylindrical or taper hole Open

d 80-90mm

Product Parameter

Designation	Mass m ≈kg	Principal dimensions mm						Fitting dimansion mm			Basic load ratings KN		Calculation coefficient				Fatigue limit load C_ur/ N	Limiting Speed n_G /min^–1	Reference Speed n_B/min^–1
Designation	Mass m ≈kg	d	D	B	r min	D₁ ≈	d₁ ≈	d_a min	D_a max	r_{a_max}	Dyc C_r	Stc C_or	Y₁	e	Y₂	Y₀	Fatigue limit load C_ur/ N	Limiting Speed n_G /min^–1	Reference Speed n_B/min^–1
1216-K-TVH-C3	1.62	80	140	26	2	122.1	102	91	129	2	40000	16800	0.16	3.9	6.03	4.08	990	5000	6800
1216-TVH	1.65	80	140	26	2	122.1	102	91	129	2	40000	16800	0.16	3.9	6.03	4.08	990	5000	6800
2216-K-TVH-C3	1.97	80	140	33	2	120.8	99.5	91	129	2	49500	19800	0.25	2.48	3.84	2.6	1180	5000	6000
2216-TVH	2.01	80	140	33	2	120.8	99.5	91	129	2	49500	19800	0.25	2.48	3.84	2.6	1180	5000	6000
1316-K-M-C3	4.5	80	170	39	2.1	144.3	110.2	92	158	2.1	89000	33000	0.22	2.87	4.44	3	1810	6000	6300
1316-M	4.56	80	170	39	2.1	144.3	110.2	92	158	2.1	89000	33000	0.22	2.87	4.44	3	1810	6000	6300
2316-K-M-C3	6.18	80	170	58	2.1	144.5	107.6	92	158	2.1	139000	48500	0.37	1.7	2.62	1.78	2700	5600	6400
2316-M	6.31	80	170	58	2.1	144.5	107.6	92	158	2.1	139000	48500	0.37	1.7	2.62	1.78	2700	5600	6400
1217-K-TVH-C3	2.03	85	150	28	2	130.4	107.5	96	139	2	49500	20600	0.17	3.73	5.78	3.91	1180	4800	6700
1217-TVH	2.07	85	150	28	2	130.4	107.5	96	139	2	49500	20600	0.17	3.73	5.78	3.91	1180	4800	6700
2217-K-M-C3	2.73	85	150	36	2	130	105.2	96	139	2	59000	23400	0.26	2.46	3.81	2.58	1340	7000	5800
2217-M	2.79	85	150	36	2	130	105.2	96	139	2	59000	23400	0.26	2.46	3.81	2.58	1340	7000	5800

Introduction

& nbsp; features self aligning ball bearing is a double row non separable bearing. The bearing consists of an outer ring with a spherical raceway, an inner ring with a cylindrical or conical hole, a ball and a cage assembly. Bearings are divided into open and sealed design. radial and axial bearing capacity self aligning ball bearing can bear bidirectional axial load and radial load. with cylindrical or conical hole bearing series 12 , 13 , 22 and 23 have two designs: cylindrical and conical holes. the taper of inner hole of tapered hole bearing is 1 : 12 followed by k . with tightening set self aligning ball bearings with tapered holes also have the types of set sleeve, lock nut and stop washer. In addition to bearings, tightening sleeves must also be ordered. widen the inner ring bearing series 112 has a widened inner ring, and one side of the inner ring has a positioning groove which can be fixed with a positioning pin. this kind of bearing is suitable for simple bearing configuration of conventional shaft. Due to the bearing bore tolerance J7 , the bearing is very easy to install. seal self aligning ball bearing series 12 , 13 , 22 and 23 also have sealed bearings. sealed bearings have contact seals on both sides with the suffix 2RS . lubrication sealed bearings are lubricated with high-quality grease, which is maintenance free. compensation angle is not in the middle under the normal condition of inner ring rotation, the maximum centering angle of the ball bearing relative to its center can reach 4 & deg;; the maximum sealing bearing can reach 1.5 & deg;. Therefore, the relative deflection between the inner ring and the outer ring is allowed, so the misalignment, the deflection of the shaft and the deformation of the bearing seat can be compensated. if it is the case of outer circle rotation or inner circle swing, its heart adjustment ability will be reduced. in this case, please contact us. working temperature the operating temperature range of open bearing with brass cage is - 30 ℃ to + 150 ℃. the maximum working temperature of the bearing with glass fiber reinforced nylon cage is + 120 ℃. Us '>) . cage standard cage for self-aligning ball bearing, see cage and ID code table for details. cage material is glass fiber reinforced nylon 66 with suffix TVH . the suffix of ball guided brass solid cage is m . check the influence of synthetic grease and oil and grease containing EP additives on the chemical stability of nylon materials. under high temperature, aging lubricating oil and additives in oil will reduce the working life of nylon cage. the lubricant change cycle must be followed. cage and ID code

series

nylon solid cage 1)