D 28-62mm-Self-aligning, With or without Inner ring--NEY（DuangDong）Bearing Industry Co.,LTD

Index >> Machined needle roller bearing >> Self-aligning, With or without Inner ring

D 28-62mm

Product Parameter

Designation	X-life	Mass m ≈kg	Principal dimensions mm									Basic load ratings KN		Fatigue limit load C_ur/N	Limiting Speed n_G min^–1
Designation	X-life	Mass m ≈kg	d	F_w	D	C ±0.	B	D₁	r min	r₁ min	s¹⁾ min	Dyc C_r	Stc C_or	Fatigue limit load C_ur/N	Limiting Speed n_G min^–1
PNA12/28	XL	37	12	15	28	12	12	24.5	0.8	0.3	0.5	7800	7900	1430	24000
PNA15/32	XL	62	15	18	32	16	16	27	0.8	0.3	0.5	14100	16200	3000	22000
PNA17/35	XL	73	17	20	35	16	16	30.5	0.8	0.3	0.5	14600	17500	3200	21000
PNA20/42	XL	136	20	25	42	20	20	36.5	0.8	0.3	0.5	21300	30500	5300	18000
PNA22/44	XL	145	22	28	44	20	20	38.5	0.8	0.3	0.5	24800	34000	5900	16000
PNA25/47	XL	157	25	30	47	20	20	42	0.8	0.3	0.5	25500	36000	6300	15000
PNA30/52	XL	181	30	35	52	20	20	47.5	0.8	0.3	0.5	27500	41500	7300	13000
PNA35/55	XL	177	35	40	55	20	20	50.5	0.8	0.3	0.5	29500	47000	8300	11000
PNA40/62	XL	227	40	45	62	20	20	58	0.8	0.3	0.5	31000	53000	9300	10000
RPNA15/28	XL	32	-	15	28	12	-	24.5	0.8	-	-	7800	7900	1430	24000
RPNA18/32	XL	52	-	18	32	16	-	27	0.8	-	-	14100	16200	3000	22000
RPNA20/35	XL	62	-	20	35	16	-	30.5	0.8	-	-	14600	17500	3200	21000

Introduction

& nbsp; features bearing is a unit composed of stamping outer ring, plastic support ring with spherical inner wall, ferrule with spherical outer surface, needle roller and cage component, and separable inner ring. self aligning needle roller bearings are X-life bearings. These bearings have optimized raceway surfaces. this can ensure higher bearing capacity and longer rated life. the compensation of the alignment can compensate the static alignment of the shaft and the bearing seat up to 3 & deg. bearings cannot be used to support swing motion. the centripetal rotation between the stamped outer ring and the ferrule will produce a moment to separate them. in order to realize the self-aligning rotation, the bearing seat tolerance given in the dimension table must be observed, please refer to the relevant page 754 . needle roller bearings without inner ring have extremely compact radial dimensions. However, they require that the raceway of the shaft be hardened and ground. if the shaft cannot be used as the raceway of rolling bearing, the bearing with inner ring shall be used. the standard inner ring is allowed to have displacement in the axial direction not exceeding the value listed in the dimension table. When large displacement is needed, the standard ferrule can be replaced by wide inner ring IR . inner circle: see page 776 . needle roller bearing without seal. open bearings can be oil lubricated or grease lubricated. limited by plastic support ring, the working temperature range is & ndash; 20 ℃ to + 100 ℃. the cage is a steel plate cage.

in order to ensure that the bearing does not slip during operation, the bearing must bear the minimum load in the radial direction frmin . It is particularly important for high-speed working conditions. If the radial load is not large enough or not, harmful sliding motion will appear on the rolling body and raceway. under continuous operation condition, the minimum radial load must meet the requirements of C R / P 50 . the limit speed in the dimension table n G is only used for oil lubrication. for grease lubrication, the allowable value will be 60% . bearing layout design Tolerance of shaft and bearing seat for the recommended tolerance of shaft with inner ring bearing, see page 150 . for the design of the shaft of the bearing without inner ring, please refer to the raceway part and relevant tables of the bearing without inner ring. recommendation for bearing pedestal