D 6.5-42mm-With bearing,With the knurled or without knurling--NEY（DuangDong）Bearing Industry Co.,LTD

Index >> Drawn Cup Needle Roller Bearing Clutch >> With bearing,With the knurled or without knurling

D 6.5-42mm

Product Parameter

Spring design		Mass/m ≈kg	Principal dimensions mm				Allowed Torque M_d per Nm	Speed ratings rpm		Allowed Radial Load Capacity¹⁾ F_r max N	Limiting load (F_r穘)_max¹⁾ N/min	Basic load ratings KN²⁾		Fatigue limit load C_ur/N
Plastic reed Designation	Steel reed Designation	Mass/m ≈kg	F_w	D	C -0.3	r min	Allowed Torque M_d per Nm	n_GW min^–1	n_GA min^–1	Allowed Radial Load Capacity¹⁾ F_r max N	Limiting load (F_r穘)_max¹⁾ N/min	Dyc C_r N	Stc C_or N	Fatigue limit load C_ur/N
HFL0308-KF	-	1.4	3	6.5	8	0.3	0.18	45000	8000	60	16000	-	-	-
HFL0308-KF-R	-	1.4	3	6.5	8	0.3	0.06	45000	8000	60	16000	-	-	-
HFL0408-KF	-	1.6	4	8	8	0.3	0.34	34000	8000	80	16000	-	-	-
HFL0408-KF-R	-	1.6	4	8	8	0.3	0.1	34000	8000	80	16000	-	-	-
HFL0606-KF-R	-	1	6	10	6	0.3	0.5	23000	13000	40	4200	-	-	-
HFL0615-KF	HFL0615	4	6	10	15	0.3	1.76	23000	13000	110	18000	-	-	-
HFL0615-KF-R	HFL0615-R	4	6	10	15	0.3	0.6	23000	13000	110	18000	-	-	-
HFL0806-KF-R	-	2	8	12	6	0.3	0.7	17000	12000	54	4200	-	-	-
HFL0822-KF	HFL0822	7	8	12	22	0.3	3.15	17000	12000	-	-	3650	3950	550
HFL0822-KF-R	HFL0822-R	7	8	12	22	0.3	1	17000	12000	-	-	3650	3950	550
-	HFL1022	8	10	14	22	0.3	5.3	14000	11000	-	-	3950	4500	630
-	HFL1226	18	12	18	26	0.3	12.2	11000	8000	-	-	6300	6700	920

Introduction

& nbsp; features the stamping outer ring needle roller clutch is a one-way clutch, including a series of thin-walled stamping outer rings, nylon cages, springs and needles on the inner wall. They can transmit one-way large torque and are extremely compact in radial direction. There are two kinds of clutches, one with bearing and the other without bearing. the stamping outer ring needle roller clutch has a very high conversion accuracy, which is due to the independent reed of each needle roller belt, so as to ensure the continuous contact between the shaft, needle roller and slope. Because of its light weight and small inertia moment, high conversion frequency is allowed. they also have small beyond friction moment. the stamping outer ring needle roller clutch can be used in various situations, such as positioning clutch, backstop clutch and overrunning clutch. In these applications, the stamping outer ring needle roller clutch has the function of idling or locking. needle roller clutch HF has no bearing and can only transfer torque. stamping outer ring needle roller clutch HF has steel spring, while needle roller clutch HF.. KF uses plastic pressure reed. when using the needle roller clutch without bearing, the axis alignment must be ensured through another rolling bearing, otherwise the needle roller clutch with bearing is needed. the needle roller clutch with knurled outer diameter has a suffix of R , which is applicable to plastic bearing pedestal. the outer surface of the stamping outer ring is processed with knurling wholly or partially along the axial direction. needle roller clutch HFL integrated sliding or rolling bearing, so it can bear torque and radial force. . the stamping outer ring needle roller clutch with knurled outer surface has a suffix of R , and is applicable to plastic bearing pedestal. the outer surface of the stamping outer ring is processed with knurling wholly or partially along the axial direction. the needle roller clutch of stamping outer ring is open at both ends. lithium base grease is used for the needle roller clutch of stamping outer ring. in many applications, the initial filling grease is enough to meet the service life of the bearing. for oil lubricated occasions, needle roller clutch without grease can be provided. These needle clutches are coated with rust inhibitor. For more information on lubrication, see page 799 . limited by grease, the suitable working temperature of the needle roller clutch in the stamping outer ring is & ndash; 10 ℃ to + 70 ℃. see the following table for suffixes of existing designs.

suffix

' return html }; function Navigator() { var type = "pc"; if (navigator.userAgent.indexOf('iPad') != -1 || navigator.userAgent.indexOf('iPhone') != -1 || navigator.userAgent.indexOf('Android') != -1) { type = "ipad" } return type };