d 5-17mm-Cylindrical hole Open or sealed--NEY（DuangDong）Bearing Industry Co.,LTD

Index >> Self Aligning Ball Bearing >> Cylindrical hole Open or sealed

d 5-17mm

Product Parameter

Designation	Mass m ≈kg	Principal dimensions mm								Fitting dimansion mm			Basic load ratings KN		Calculation coefficient				Fatigue limit load C_ur/ N	Limiting Speed n_G /min^–1	Reference Speed n_B/min^–1
Designation	Mass m ≈kg	d	D	B	r min	D₁ ≈	D₂ ≈	d₁ ≈	d₂ ≈	d_a min	D_a max	r_{a_max}	Dyc C_r	Stc C_or	e	Y₁	Y₂	Y₀	Fatigue limit load C_ur/ N	Limiting Speed n_G /min^–1	Reference Speed n_B/min^–1
135-TVH	0.01	5	19	6	0.3	14.5	-	10.1	-	7.4	16.6	0.3	2600	475	0.35	1.82	2.82	1.91	29.5	36000	34500
126-TVH	0.009	6	19	6	0.3	14.5	-	10.1	-	8.4	16.6	0.3	2600	475	0.35	1.82	2.82	1.91	29.5	36000	41500
127-TVH	0.014	7	22	7	0.3	16.8	-	12.4	-	9.4	19.6	0.3	2750	560	0.33	1.92	2.97	2.01	34.5	36000	36000
108-TVH	0.014	8	22	7	0.3	16.8	-	12.4	-	10.6	19.4	0.3	2750	560	0.33	1.92	2.97	2.01	34.5	36000	-
129-TVH	0.022	9	26	8	0.6	20	-	14.5	-	13.2	21.8	0.6	3950	800	0.32	1.95	3.01	2.04	50	32000	32500
1200-TVH	0.034	10	30	9	0.6	23.5	-	16.3	-	14.2	25.8	0.6	5700	1180	0.32	1.95	3.02	2.05	73	30000	30000
2200-2RS-TVH	0.053	10	30	14	0.6	-	25.9	-	14.1	14.2	25.8	0.6	5700	1180	0.32	1.95	3.02	2.05	73	18000	-
2200-TVH	0.045	10	30	14	0.6	24.2	-	15.1	-	14.2	25.8	0.6	8800	1730	0.58	1.09	1.69	1.14	107	28000	29000
1201-TVH	0.041	12	32	10	0.6	25.4	-	18.2	-	16.2	27.8	0.6	5700	1260	0.37	1.69	2.62	1.77	78	30000	29000
2201-2RS-TVH	0.058	12	32	14	0.6	-	27.9	-	16.2	16.2	27.8	0.6	5700	1260	0.37	1.69	2.62	1.77	78	17000	-
2201-TVH	0.05	12	32	14	0.6	26.2	-	17.1	-	16.2	27.8	0.6	9400	1920	0.53	1.2	1.85	1.25	120	26000	26000
1202-TVH	0.048	15	35	11	0.6	29.2	-	20.2	-	19.2	30.8	0.6	7700	1730	0.34	1.86	2.88	1.95	108	26000	26000

Introduction

& nbsp; features self aligning ball bearing is a double row non separable bearing. The bearing consists of an outer ring with a spherical raceway, an inner ring with a cylindrical or conical hole, a ball and a cage assembly. Bearings are divided into open and sealed design. radial and axial bearing capacity self aligning ball bearing can bear bidirectional axial load and radial load. with cylindrical or conical hole bearing series 12 , 13 , 22 and 23 have two designs: cylindrical and conical holes. the taper of inner hole of tapered hole bearing is 1 : 12 followed by k . with tightening set self aligning ball bearings with tapered holes also have the types of set sleeve, lock nut and stop washer. In addition to bearings, tightening sleeves must also be ordered. widen the inner ring bearing series 112 has a widened inner ring, and one side of the inner ring has a positioning groove which can be fixed with a positioning pin. this kind of bearing is suitable for simple bearing configuration of conventional shaft. Due to the bearing bore tolerance J7 , the bearing is very easy to install. seal self aligning ball bearing series 12 , 13 , 22 and 23 also have sealed bearings. sealed bearings have contact seals on both sides with the suffix 2RS . lubrication sealed bearings are lubricated with high-quality grease, which is maintenance free. compensation angle is not in the middle under the normal condition of inner ring rotation, the maximum centering angle of the ball bearing relative to its center can reach 4 & deg;; the maximum sealing bearing can reach 1.5 & deg;. Therefore, the relative deflection between the inner ring and the outer ring is allowed, so the misalignment, the deflection of the shaft and the deformation of the bearing seat can be compensated. if it is the case of outer circle rotation or inner circle swing, its heart adjustment ability will be reduced. in this case, please contact us. working temperature the operating temperature range of open bearing with brass cage is - 30 ℃ to + 150 ℃. the maximum working temperature of the bearing with glass fiber reinforced nylon cage is + 120 ℃. Us '>) . cage standard cage for self-aligning ball bearing, see cage and ID code table for details. cage material is glass fiber reinforced nylon 66 with suffix TVH . the suffix of ball guided brass solid cage is m . check the influence of synthetic grease and oil and grease containing EP additives on the chemical stability of nylon materials. under high temperature, aging lubricating oil and additives in oil will reduce the working life of nylon cage. the lubricant change cycle must be followed. cage and ID code

series

nylon solid cage 1)